CRM Mitchell1, Author at Bauer's Custom Hitches

2015 Chevrolet Equinox
Mileage
122,116
Service Date
9/5/2024
Services Performed
SHOP SUPPLIES & PROCESSING
INSTALL NEW HITCH AND TORQUE FASTENERS TO MANUFACTURER SPECIFICATION. CURT CLASS 3 HITCH PN: 13591 (350 LBS TW & 3,500 LBS GTW) PRIOR TO INSTALLATION OF THE HITCH IT WAS OBSERVED THAT THERE IS A HOLE IN THE FRAME AT THE REAR OF THE VEHICLE THAT APPEARS TO HAVE BEEN CASED BY USING A RECOVERY CHAIN HOOK IN AN ACCESS HOLE. A SMALL PORTION OF MATERIAL WAS BENT OUT OF THE WAY OF INSTALLATION OF THE HITCH. THE CUSTOMER WAS SHOWN THE DAMAGE PRIOR TO INSTALLATION. DUE TO IT'S PROXIMITY TO THE HITCH MOUNTING LOOCATION IT IS RECOMMENDED TO INSPECT THIS DAMAGE ANNUALLY AT A MINIMUM. BAUER'S CUSTOM HITCHES, ITS EMPLOYEES, OR AFFILIATES ARE NOT RESPONSIBLE FOR DAMAGES, INJURY, OR DEATH TO PROPERTY OR PERSON'S AS A RESULT OF THE USE OF THIS HITCH. THIS DISCLAIMER WAS FULLY EXPLAINED TO THE CUSTOMER AND IT IS THE CUSTOMER'S RESPONSIBILITY TO INFORM ANY OTHER FUTURE OWNER'S OR OPERATORS OF THE VEHICLE OF THIS DISCLAIMER IF THE HITCH IS TO REMAIN INSTALLED OR IN USE.
USED A TAP TO CLEAN AND RESTORE (4) CORRODED WELD NUTS IN THE FRAME OF THE VEHICLE TO INSTALL HITCH.
WILLIAM N. gave our service a 5 star review on 9/7/2024
2004 Buick LeSabre
Mileage
179,656
Service Date
8/16/2024
Services Performed
CALIBRATION OF BREATHALYZER UNIT AND SYSTEM INSPECTION.
SARAH L. gave our service a 5 star review on 8/19/2024
2015 Chevrolet Equinox
Mileage
81,484
Service Date
7/29/2024
Services Performed
SHOP SUPPLIES & PROCESSING
REMOVE DAMAGED CLASS 2 HITCH AND INSTALL REPLACEMENT CLASS 3 HITCH.
LARRY L. gave our service a 5 star review on 7/31/2024
2020 Volkswagen Tiguan
Mileage
34,316
Service Date
7/26/2024
Services Performed
SHOP SUPPLIES & PROCESSING
INSTALL NEW HITCH AND TIGHTEN BOLTS TO MANUFACTURERS SPECIFICATION
INSTALL NEW WIRING HARNESS ON VEHICLE AND TEST
BILL C. gave our service a 5 star review on 7/27/2024
2004 Buick LeSabre
Mileage
178,721
Service Date
7/14/2024
Services Performed
SWAP HANDSET OF BREATHALYZER UNIT AND SYSTEM INSPECTION. NEW HANDSET SN: H9049032
SWAP BLOCKER OF BREATHALYZER UNIT AND SYSTEM INSPECTION. NEW BLOCKER S/N: V4151189
SARAH L. gave our service a 5 star review on 7/26/2024
2020 Honda Odyssey
Mileage
42,906
Service Date
7/19/2024
Services Performed
SHOP SUPPLIES & PROCESSING
INSTALL NEW HITCH AND TORQUE FASTENERS TO MANUFACTURER SPECIFICATION.
ADDITIONAL LABOR- RESTORE (2) CORRODED WELD NUTS
INSTALL NEW WIRING HARNESS AND TEST ALL CIRCUITS.
PETER W. gave our service a 5 star review on 7/20/2024
2015 Chevrolet Cruze
Mileage
151,122
Service Date
7/17/2024
Services Performed
CALIBRATION OF BREATHALYZER UNIT AND SYSTEM INSPECTION.
JON C. gave our service a 5 star review on 7/18/2024
2021 Jeep Grand Cherokee L
Mileage
48,675
Service Date
7/2/2024
Services Performed
CALIBRATION OF BREATHALYZER UNIT AND SYSTEM INSPECTION.
DAVID & JANELL K. gave our service a 5 star review on 7/2/2024
2016 Dodge Journey
Mileage
92,080
Service Date
6/11/2024
Services Performed
SHOP SUPPLIES & PROCESSING
INCLUDES TRAILER AUXILIARY CHARGE CIRCUIT INSTALL.
CARGO AREA REQUIRED REMOVAL OF AFTERMARKET SUBWOOFER ENCLOSURE, TOILET, GENERATOR, AND PERSONAL ARTICLES TO LOWER/ RAISE SPARE TIRE.
COREY S. gave our service a 5 star review on 6/12/2024
2018 Toyota Sienna
Mileage
50,373
Service Date
6/10/2024
Services Performed
USED TRAILER SIMULATOR TO TEST THE 4-FLAT HARNESS/MODULE CURRENTLY INSTALLED IN THE VEHICLE PRIOR TO CUSTOMER REQUESTED INSTALLATION OF 7-WAY SOCKET. TRAILER LEFT TURN AND TRAILER LEFT BRAKE SIGNALS DO NOT FUNCTION. CONSULTED CUSTOMER AND DIAGNOSTIC WAS AUTHORIZED. REMOVED PANELS NECESSARY TO ACCESS THE TAIL LIGHT CONVERTER MODULE. USED A TEST LIGHT AND WIRE PROBE TO CHECK FOR LEFT TURN AND BRAKE SIGNAL INPUT FROM THE VEHICLE TO THE TAIL LIGHT CONVERTER MODULE. OBSERVED VOLTAGE INPUT TO THE TAIL LIGHT CONVERTER MODULE FOR LEFT TURN AND LEFT BRAKE. USED A TEST LIGHT AND WIRE PROBE TO CHECK FOR LEFT TURN AND BRAKE SIGNAL OUTPUT FROM THE TAIL LIGHT CONVERTER MODULE TO THE 4-FLAT TRAILER CONNECTOR. NO VOLTAGE OUTPUT WAS OBSERVED FROM THE TAIL LIGHT CONVERTER MODULE. THIS INDICATES AN INTERNAL FAULT IN THE TAIL LIGHT CONVERTER MODULE. THE TAIL LIGHT CONVERTER MODULE IS NOT A SERVICEABLE ITEM AND WOULD NEED TO BE REPLACED TO CORRECT THE CONCERN.
REMOVE FAULTY TAIL LIGHT CONVERTER MODULE AND POWER SUPPLY WIRE INSTALLED BY CUSTOMER AND INSTALL NEW UNIT IN PREPARATION FOR 7-WAY SOCKET INSTALLATION.
INSTALL 7-WAY TRAILER SOCKET- [DOES NOT INCLUDE REVERSE LIGHT SIGNAL]
ROUTE FUSED POWER SUPPLY WIRE FROM ENGINE COMPARTMENT TO 7-WAY SOCKET AT REAR OF VEHICLE. *NOTE TO CUSTOMER: THIS CIRCUIT WILL IS USED TO SUPPLY AUXILIARY POWER TO THE 7-WAY SOCKET AT THE REAR OF THE VEHICLE. CHECK ALL MANUFACTURER INSTRUCTIONS PRIOR TO UTILIZING THIS CIRCUIT TO POWER ANY COMPONENTS OR MAINTAIN BATTERIES. DO NOT EXCEED THE CAPACITY OF THE FUSE OR THE WIRE. 12-AWG COPPER WIRE IS USED FOR THIS INSTALLATION.
INSTALL CUSTOMER SUPPLIED INFLATABLE AIR BAG SUSPENSION KIT. AIR LIFT P/N: 60732 *NOTE TO CUSTOMER: – THIS AIR BAG KIT DOES NOT INCREASE LOAD CARRYING CAPACITY OF THE VEHICLE. – MAINTAIN INFLATION PRESSURE OF 35 PSI IN THE AIR BAGS WHEN INSTALLED IN THE VEHICLE. – DO NOT LET AIR BAG PRESSURE FALL BELOW 5 PSI AT ANY TIME. PLEASE CONSULT INSTRUCTION MANUAL THOROUGHLY PRIOR TO TOWING.
SHOP SUPPLIES & PROCESSING
ANDY B. gave our service a 5 star review on 6/12/2024

CRM Mitchell1

We Service and Repair all CRM Mitchell1 cars