2015 Chevrolet Equinox
Mileage
122,116
Service Date
9/5/2024
Services Performed
- SHOP SUPPLIES & PROCESSING
- INSTALL NEW HITCH AND TORQUE FASTENERS TO MANUFACTURER SPECIFICATION. CURT CLASS 3 HITCH PN: 13591 (350 LBS TW & 3,500 LBS GTW) PRIOR TO INSTALLATION OF THE HITCH IT WAS OBSERVED THAT THERE IS A HOLE IN THE FRAME AT THE REAR OF THE VEHICLE THAT APPEARS TO HAVE BEEN CASED BY USING A RECOVERY CHAIN HOOK IN AN ACCESS HOLE. A SMALL PORTION OF MATERIAL WAS BENT OUT OF THE WAY OF INSTALLATION OF THE HITCH. THE CUSTOMER WAS SHOWN THE DAMAGE PRIOR TO INSTALLATION. DUE TO IT'S PROXIMITY TO THE HITCH MOUNTING LOOCATION IT IS RECOMMENDED TO INSPECT THIS DAMAGE ANNUALLY AT A MINIMUM. BAUER'S CUSTOM HITCHES, ITS EMPLOYEES, OR AFFILIATES ARE NOT RESPONSIBLE FOR DAMAGES, INJURY, OR DEATH TO PROPERTY OR PERSON'S AS A RESULT OF THE USE OF THIS HITCH. THIS DISCLAIMER WAS FULLY EXPLAINED TO THE CUSTOMER AND IT IS THE CUSTOMER'S RESPONSIBILITY TO INFORM ANY OTHER FUTURE OWNER'S OR OPERATORS OF THE VEHICLE OF THIS DISCLAIMER IF THE HITCH IS TO REMAIN INSTALLED OR IN USE.
- USED A TAP TO CLEAN AND RESTORE (4) CORRODED WELD NUTS IN THE FRAME OF THE VEHICLE TO INSTALL HITCH.
WILLIAM N. gave our service a 5 star review on 9/7/2024
